Print Speed/Rate
Up to 10" per second and, depending on
label and product size, approximately
60 to 80 per minute
Print Method
Thermal transfer and direct thermal
Bar Codes
UPC-A, UPC-E, EAN-8, EAN-13, CODE 39, 12/5, CODE 128, CODABAR, MSI, 2/5,
CODE 93, UPC Bookland, Matrix 2/5, POSTNET, UCC/EAN 128, PDF-417, Maxicode,
Data Matrix
Bar Code Ratios
1:2, 1:3, 5:2
Human Readable Fonts
12 proportional and mono-spaced fonts including OCR-A and OCR-B
representations and an outline font. American and European characters,
uppercase and lower case with descenders (code table 850).
Label Size
Minimum 1" wide x 1/2" long
Maximum 5 1/4" wide x 14" long
Maximum Print Area
5 " wide x 14" long
Label Roll Capacity
12" maximum outside diameter wound on a 3" inside-diameter core. Die-cut
waste removed with a minimum of 1/8" separations between labels in running
direction. |
Interface
Centronics parallel
RS-232c Serial
Application Method
Tamp is standard
Wipe-on, flag, blow, corner-wrap, and swing tamp are optional
Interface Sensors
Product sensor - photo eye/limit switch/PLC input
Auxiliary output with connector standard
Electrical
115 VAC/60Hz - 250 W idle, 600 running
Air Requirements
80 psi/3cfm
Environment
Operating 50-95 degrees F (10-35 degrees C)
15-85% RH, non-condensing
General Size
25" W x 22" D x 21" H
Weight
61 lbs. with u-arm
Options
Variety of print engines, left-hand models, alarm, upgrade for longer
labels, power unwind for larger spools |
